Does anyone know how to....

Does anyone know of the intermediate piece that connects to the throttle body on one side and has clamps(on both sides) that connect to the manifolds? It is Part #996 110 215 53. Can it come out without removing the intake manifolds? I ordered a new one because I have a half a bolt stuck in one,which will cause an air leak=CEL. Parts should be here be the end of next week.

If you mean the rubber sleeve, it can be slided out by removing the clumps. The space is tight so you may also need to disconnect the air hose from the throttle and remove the nut in the bracket underneat the throttle body; then undo the clamp on the opposite side of the throttle and slide the throttle to give you more space.

Here is a diagram....